How to Amplify a Piezo Buzzer

You probably looked this up because you wanted to know how to make your piezo Buzzer more deafening. Or maybe you have a small battery to power your buzzer but the sound is too soft. In this tutorial, I will cover the Science behind Piezo Buzzer and how to amplify it with a simple technic.

Hardware Required

battery

3.7V Lithium Ion Battery

buzzer
Piezo Buzzer

dc

DC to DC Step Up Converter

Software Required

None

The Concept

a

So how does a piezo Buzzer actually works? We all know that Sounds are generated through vibration. So in order to achieve vibration, piezo buzzers have a piezo transducer which is made out of a thin sheet of copper. When exposed to electromagnetic energy, the transducer will be pushed. Modern buzzers actually have oscillator circuit installed to self-drive it so a DC Current can be used to power it up.

20161218_1235550

This is a very important information in amplifying a piezo buzzer. Since piezo buzzer need a DC Current to power it up, the way we amplify our Piezo Buzzer is to increase the voltage of our power supply.

The magic behind increasing the voltage of our power supply is a DC to DC Step Up converter like this one. This is a ready made module which can accept an input voltage from 1.5 to 34v and increase it up to 35v. There is a on-board potentiometer which allowed the user to adjust the Output voltage which is perfect for what we are going to do next. The module specific name is LM2577 DC-DC Adjustable Step-up Power Converter Module, and I got mine for about RM18. You can get it at Electronic Hardware stores. Usually, stores that sell arduino modules will carry this item as well.

20161218_123730

I will first show you how loud a piezo buzzer is when powered with a 3.7v Lithium Battery. You can use any type of 3.7v Lithium battery you like. Then I will step up the voltage of the 3.7v battery and you can compare the sound levels for both cases.

Circuit Diagram

Some of the component I used can’t be found on Frtizing. So I gotta use paint, sorry about that =3

circuit

Step by Step / Procedures / Preparation

  1. Connect your hardware according to the circuit provided below.circuit

2. Use a flathead screwdriver to turn the potentiometer until you get around 12 volts.

20161218_12425420161218_124229

3. Now disconnect your multimeter and reconnect the Piezo Buzzer. It should sound extremely loudly. My ear actually “muted” temporary when I attempt this.

20161218_124108

This is the comparison video which I’ve filmed. You can compare the difference between having the dc to dc converter and without having the dc to dc converter.

Thanks for checking out this tutorial. Be sure that you check out other cytron tutorials as well!

Video

References

http://www.cytron.com.my/p-li-3.7-1100

http://www.cytron.com.my/p-so-buzz?search=piezo%20buzzer&sort=relevance&order=DESC

https://en.wikipedia.org/wiki/Buzzer

Buy

, , ,

Related Post

Thief Detector !!

PROJECT 11 – PIEZO BUZZER: MELODY

Project 8 – Piezo buzzer: Melody – Birthday Song

Leave a Reply

Your email address will not be published. Required fields are marked *