Recently, Cytron Technologies has come out with the latest version of Bluetooth wireless module, BlueBee 4.0! Today I am going to show you how to setup master and slave connections between these modules to do some brilliant stuff. Remember BlueBee 4.0 can be only slave device when operating in EDR mode, so the modules will be operating in BLE mode during the master and slave communication.
Hi everyone, did you watch our Selamat Hari Raya Aidilfitri 2015 video? In that video I use Cytron RainbowBit to make the colourful plate. The number of the RainbowBit that light up is controlled by the analog distance sensor. When the analog distance sensor detect the object nearer, more RainbowBit will light up and when the distance is less than or equal to 20 cm, all the RaibowBit will light up and make a beautiful cycle of colours.
Introduction Good day, As we all know, an LED Cube is a bunch of LED that arranged in a cube shape that can perform some interesting lighting effects according to your program. In this tutorial, we are going to learn how to construct a 4x4x4 LED Cube using Arduino UNO board without extra IC, purely with the available on-board pins.
Introduction Good day, The Advanced Auto-Calibrating Line Sensor (LSA08) is capable to operate in three different modes: digital, analog, and serial. In this tutorial, I am going to show you how to make a line following robot using LSA08 in serial mode with Arduino Uno board.
Introduction Good day, The Advanced Auto-Calibrating Line Sensor (LSA08) is capable to operate in 3 different modes: digital, analog, and serial. In this tutorial, I am going to show you how to make a line following robot using LSA08 in analog mode with Arduino Uno board.
In this tutorial, we are going to built an advanced line following robot. Why I say advanced? Because normal line follower will only respond with specified/predetermined speed, however with a little trick, we can make the robot changes its speed depending on the line position.