Introduction Cytron XBee Shield (SHIELD-XBEE) is an Arduino compatible shield which is compatible with Arduino UNO, Arduino Duemilanove, Arduino Mega, Arduino Leonardo and possibly other pin compatible main boards. XBee Shield is compatible with XBee Modules and other XBee Compatible
I already share Arduino Wireless Programming tutorial before, by using a BBFuino. But people ask me, how if I already have Arduino UNO, is there any shield that can do that? The answer is YES! HARDWARE 1. Arduino Uno (link).
By combining these two tutorial (1) Remote Mobile Robot with XBee-WiFi and (2) Xbee WiFi in Soft AP Mode, we can have a Remote Mobile Robot with XBee-WiFi (Android). HARDWARE 1. MC40A (link). 2. UIC00B - Programmer (link). 3. SPG10-150K (link).
There have a request from the customer on how to make the Xbee WiFi in AP mode. It means you can connect to Xbee WiFi directly without using a router. The previous version of Xbee WiFi (S6) is not support
We are carrying the simple to use RF remote control set, it comes with a remote control and a receiver, operating at 315MHz RF. Looking at the video to know the basic operation. [youtube]http://www.youtube.com/watch?v=iqU-b1ZWwtM[/youtube] Yes, it is very easy to
*During write this tutorial, Xbee WiFi don't have SoftAP mode yet. But now, Xbee WiFi offers SoftAP mode and much more suitable for this application. So it is recommended to read this tutorial: Remote Mobile Robot with XBee-WiFi (Android) Since
The Bluetooth Bee (BTBEE) is an easy to use Bluetooth Serial Port Profile (SPP) module compatible with existing XBEE sockets, designed for transparent wireless serial connection setup. Using UART interface, BTBEE only can be use as a slave and communicate with host like computer, bluetooth handphone, SKKCA and other bluetooth devices. Bare in mind that communication between 2 BTBEE is not working. Bluetooth BEE is compatible with XBEE starter kit board (SKXBEE-BOARD) and UC00B, so you may use them for BTBEE communication.