Skill level: Advanced Note: This tutorial is for those who are already experienced in C, MPLAB X and some knowledge in PWM. I’m sure you have seen a lot of those RGB lights everywhere and they do sure look amazing
If you wish to control your powerful SmartDriveDuo-60 using Arduino, this tutorial will guide you on setting mode, connection and basic program. Have a visit!
Introduction Lord Kelvin said, “If you cannot measure it, you cannot improve it”. In this tutorial, we decide to demonstrate simple IoT project using ESPresso Lite V2.0 board to send digital compass HMC5883L data to ThingSpeak Web. At the same
Introduction Peak current Continuous current Current when the motor move from stationary condition or when changing direction. Current that supply continuously to the motor when the motor is running either with load or without any load. This condition usually happen
Introduction This tutorial is to verify or count the output pulses from the quadrature encoder type of motor by using arduino. Hardware requirements -CT UNO
Introduction Since we already have Espresso Lite lets write a getting started tutorial for it. In this tutorial, the topics that we cover are: Board Setup (connect to network) Getting Started with Arduino IDE How to install the library from
Hi everyone!! Today, we would like to share guideline on soldering Breakout boards to the Micro Metal Gearmotor. Hardware required: 1)Breakout boards for SPG10 2)Micro Metal Gearmotor 3)Soldering gun Procedures: If you look carefully on the Micro Metal Gearmotor, there would be
INTRODUCTION: A stepper motor is an electric motor that rotates in discrete step increments. The movement of each step is precise and repeatable; therefore, the motor's position can be controlled precisely without any feedback mechanism, as long as the motor