In this SSR-S108T02, you only need a voltage 3.3V-5V to switch on the AC load rated 125VAC. You can use the SSR-S108T02 to control a AC housing lamp, fans, solenoids, and valves. Please note that this only work for AC load. In this tutorial, i will use SK40C with 16F877A to switch ON and OFF of the AC lamp by using SSR-S108T02.
In this tutorial, you will going to learn on how to interface this product with SK40C and BBFUINO with Thermocouple K in order to measure the temperature. The sample source code was attached at the end of this tutorial.
Ever heard of an embedded electronic project called LED cube? Actually, this project had been done by many embedded electronic hobbyists due to its interesting display effects by lighting up LED Cube in certain patterns. The LED Cube lighting patterns can be controlled by microcontroller based on the program loaded into it. In this tutorial, user will be guided to build up a 8x8x8 LED Cube in step by step.
In this tutorial, you will learn on how to display the character on LCD by pressing the 4×4 keypad button.
In this project, we will learn about how to drive two DC geared motor with MD10C by using SKPS. Thus, we will treat these two motors as the left wheel motor and right wheel motor. Therefore, we will use PS2 controller to control two DC motors in various type of movements such as move forward, move backward, rotate to left, rotate to right. In addition, we will use joystick to control these two motors in different movement with constant speed and variable speed. Meanwhile, we will use PIC16F887 in this tutorial for SK40C with LCD 2×16 to display some important messages when certain button of PS2 controller was pressed.