Hello everyone! In previous tutorial, we have learnt how to use Arduino IDE to create and upload firmware to ESP8266 WiFi module and make it a hello world server. But what if we want it to be more than just a hello world server?
Hello everyone! In this tutorial, we are going to show you how to create a simple hello web server with ESP8266 WiFi module using Arduino IDE. Note**: In this tutorial, we assume you have already learnt how to setup ESP8266 WiFi module. If you don’t know how to, please refer to this tutorial.
Hello everyone! Cytron Technologies has brought you another small and yet fantastic module Wifi Serial Transceiver ESP8266!! Don't under estimate the capabilities of this small module, it can give you more than you can imagine! Ever think about making your own web
Introduction Cytron XBee Shield (SHIELD-XBEE) is an Arduino compatible shield which is compatible with Arduino UNO, Arduino Duemilanove, Arduino Mega, Arduino Leonardo and possibly other pin compatible main boards. XBee Shield is compatible with XBee Modules and other XBee Compatible
If you are familiar with XBee, you might have experience of the module does not response to your X-CTU or Terminal program or microcontroller. Yup, for unknown reason, XBee module might be DEAD :) But you can revive it by
By combining these two tutorial (1) Remote Mobile Robot with XBee-WiFi and (2) Xbee WiFi in Soft AP Mode, we can have a Remote Mobile Robot with XBee-WiFi (Android). HARDWARE 1. MC40A (link). 2. UIC00B - Programmer (link). 3. SPG10-150K (link).
There have a request from the customer on how to make the Xbee WiFi in AP mode. It means you can connect to Xbee WiFi directly without using a router. The previous version of Xbee WiFi (S6) is not support