Introduction: In the LED Blinking tutorial, we use serial command line and software PuTTY to give a command in the Raspberry Pi. For this tutorial, we will use Remote Desktop Connection as our interface to program Raspberry Pi.
In this project, we will show how to use the Fingerprint Reader GUI to read and show the data attendance of human being.
In this project, we will show you the SK18B LED GUI Control which is a simple GUI platform that can be use to control ON/OFF or blinking the LEDs on SK18B.
In this project, we will show you how to control independent 8-16 servo motor via SC08A servo motor controller and UC00A USB to UART converter by using SC08A Servo GUI Control Panel.
The main purpose for this project is to show how to get start on Graphical User Interface (GUI). A graphical user interface (GUI) is one of the ways to interface between computer and human which can manipulated by mouse or a keyboard. A combination of an input device such as mouse, and visual representations of the workspace and tasks, the user able to interace with the computer or laptop in a manner similar to physical manipulations available in the real world.
This project main purpose is using GUI (Graphical User Interface) panel to control the moving direction and rotating direction by wireless communication. For this project, we need two SKXBee Pro, USB cable, PR19 Flexibot, 12V LIPO Batterry or 12VDc adapter and computer. In fact, this project is used computer (GUI) to interface with SKXBEE 1 (wireless communicate send command to SKXBee 2) for control the Flexibot action. So, we have to plug in the USB cable from SKXBee 1 to computer USB port.