The TCS3200 color sensor uses a TAOS TCS3200 RGB sensor chip to detect color. It contains four white LEDs that light up the object in front of it. There are four controllable white color LEDs for natural lighting of the object. This tutorial will show you the basic operation on how to use this sensor.
This tutorial shows how to get start with IR Distance Click using Arduino Uno.
The LM35 temperature sensor is an integrated circuit sensor that can be used to measure temperature with an electrical output proportional to the temperature in Celsius. This tutorial will show you the basic operation on how to use this sensor.
Photosensitive resistor module(SN-LIGHT-MOD) is most sensitive to environmental light intensity. This SN-LIGHT-MOD is generally used to detect the ambient brightness and light intensity.This tutorial will show you the basic operation on how to use this sensor.
The output signal of Digital Infrared Sensor is needed to be pull high as it is NPN output. The module will output a HIGH if no object is detected and a LOW if an object is detected. In this tutorial, you are going to learn on how to use the BBFuino and SK28A to control SN-E18-B03N1.