We wanted to demo the current going through a huge motor going through a super high ampere motor driver, 160 ampere to be exact. My task is to design and develop an ampere meter, showing the current! Software MPLABX IDE
Introduction SN-ACS712 is a breakout board for the fully integrated Hall Effect based linear current sensor, ACS712. There are several types of current sensors and many different ways to measure current of a circuit, but we prefer using Hall effect sensor because
Introduction After looking through the GSM modem tutorial, I believe you will wonder what can you do with the GSM modem in our daily life. So , I have come out with the idea of using it with the PIR
In this tutorial, you will going to learn on how to implement and use the flexible bend (for SN-FLX-01 and SN-FLX-02) by using BBFuino and SK28A. The setup and the source code shared at here will result the voltage display on LCD as you bend the flexible sensor.
Introduction BB-ACS756 is a current sensor with integrated Hall Effect. It can be used to measure current and provide precise solution for AC or DC current sensing in industrial, automotive, commercial and communications system. Normally, it is use to measure
Yup, it has been a long while since I posted post regarding new products. Been busy on workshop and design work :) Last new products post was in Feb, here. So it has been more than 3 months, looking at
The output signal of Digital Infrared Sensor is needed to be pull high as it is NPN output. The module will output a HIGH if no object is detected and a LOW if an object is detected. In this tutorial, you are going to learn on how to use the BBFuino and SK28A to control SN-E18-B03N1.